ktr

메뉴

서브 비주얼

Special standard test

Special standard test

Test and evaluation for national defense industry

  • - Certification to show that the product can physically and functionally tolerate the handling, transportation and service environment of munitions
  • - Establishment of efficient test and evaluation system to improve reliability and quality of munitions
  • - ONE-STOP test certification service with professional technology
  • - High temperature, low temperature, humidity, thermal shock, vibration, impact, drop, electromagnetic wave, mold, fluid pollution, rainfall, sand/dust, fire resistance, etc.
  • - KTR complies with the tailoring system required in the defense field, and enforces security measures and one-stop service support.

Test inspection and target item

Test inspection and target item
Item Detailed item Remarks
National defense Equipment and parts for army, air Force and navy - MIL-STD-202G, MIL-STD-810F, MIL-STD-810G, MIL-STD-810C, MIL-STD-167-1A, MIL-PRF-28800, MIL-STD-461
Aviation Equipment and parts for aircraft, UAV and helicopter - RTCA DO-160, MIL-STD-810, KS W 0811
EMP protection facility Defense and civil protection facilities and building/material shielding - MIL-STD-188-125-1/2, DMFC 4-40-70, IEEE-STD-299/299.1

Status of service

Status of service
Classification test items
Climate and environmental test
  • - Low temperature test, high temperature test, high temperature and high humidity test, temperature cycle test, temperature impact test, salt spray
  • - Thermal shock test
  • - Altitude test
  • - Immersion test
  • - Rainfall test (procedure I, II, III)
  • - Salt spray test
Mechanical environment test
  • - Vibration test (Sweep sine, random, random on random, sine on random)
  • - Impact test (Half sine, sawtooth, SRS, etc.)
  • - Complex environmental vibration test
  • - Acceleration test
  • - Drop Test
National defense equipment and aircraft (electromagnetic wave)
  • - MIL-STD-461
    CE101, CE102, CS101, CS106, CS114, CS115, CS116, CS117, CS118, RE101, RE102, RS101, RS103
  • - RTCA DO-160
    Section 15, Section 16, Section 17, Section 18, Section 19, Section 20, Section 21, Section 22, Section 25
EMP protection facility
  • - MIL-STD-188-125-1/2
    SE : 10 kHz ~ 1 GHz, PCI : 5 kA, CWI : 100 kHz ~ 1 GHz /
    SE : 10 kHz ~ 1 GHz, PCI : 5 kA
  • - DMFC 4-40-70
    SE : 10 kHz ~ 1 GHz, PCI : 5 kA, CWI : 100 kHz ~ 1 GHz,
    SELDS : 95 kHz, 1 A
  • - IEEE-STD-299/229.1
    9 kHz ~ 18 GHz / 0.75 m to 2 m(SE : 10 kHz ~ 18 GHz)
Other special fields
  • - Sand/dust test
  • - Mold test
  • - Fluid contamination test
  • - Fire resistance test
  • - Noise and vibration measurement
  • - Nondestructive test

Main facilities

Main facilities
Mid-sized vibration tester
Mid-sized vibration tester
  • - Model : V8-440 (LDS)
  • - Sine force : 60 kN
  • - Random force RMS : 66 kN
  • - Displacement : 63 mm(p-p)
  • - Acceleration : Sine (140 g), Random (50 g r.m.s)
  • - Table Size : 900 X 900 mm
Vibration measurement and analyzer
Vibration measurement and analyzer
  • - Model : LMS SCADAS Mobile SCM01 (SIMENS)
  • - Channels : 8 CH
  • - Input Frequency Range : (0 ~ 102.4) kHz
  • - Dynamic Range : 110 dB
  • - Analysis Program S/W : Modal Impact Testing, FFT Analyzer,
    Tracked FFT functions, Octave based functions,
    Sound Level Meter functions, Order analyzer functions
Thermo-hygrostat (Three EA)
Thermo-hygrostat (Three EA)
  • - Model : PL-4J (ESPEC)
  • - Temperature : -40 ℃ ~ 180 ℃
  • - Humidity : 20 %R.H. ~ 98%R.H.
  • - Deviation : ±0.3 ℃, ±2.5%R.H.
  • - Cooling rate : Average 2.0 ℃/min
  • - Heating rate : Average 2.0 ℃/min
  • - Inside Size : 1,000 X 800 X 1,000 mm (W, D, H)
Thermo-hygrostat (Seven EA)
Thermo-hygrostat (Seven EA)
  • - Model : PSL-4J (ESPEC)
  • - Temperature : -70 ℃ ~ 180 ℃
  • - Humidity : 20 %R.H. ~ 98%R.H
  • - Deviation : ±0.3 ℃, ±2.5%R.H.
  • - Cooling rate : Average 2.0 ℃/min
  • - Heating rate : Average 2.0 ℃/min
  • - Inside Size : 1,000 X 800 X 1,000 mm (W, D, H)
Accelerated temperature/humidity chamber (Two EA)
Accelerated temperature/humidity chamber (Two EA)
  • - Model : EBE-8 (ESPEC)
  • - Temperature : -70 ℃ ~ 180 ℃
  • - Humidity : 20 %R.H. ~ 98%R.H.
  • - Deviation : ±0.3 ℃, ±2.5%R.H.
  • - Cooling rate : Average 20.0 ℃/min
  • - Heating rate : Average 20.0 ℃/min
  • - Cooling rate : Average 10.0 ℃/min
  • - Heating rate : Average 10.0 ℃/min
  • - Inside Size : 1,000 X 800 X 1,000 mm (W, D, H)
Thermal shock chamber(One EA)
Thermal shock chamber(One EA)
  • - Model : TSD-101-W (ESPEC)
  • - Temperature : -65 ℃ ~ 300 ℃
  • - Recovery Time : Within 5min
  • - Inside Size : 700 X 300 X 400 mm (W, D, H)
Thermal shock chamber (One EA)
Thermal shock chamber (One EA)
  • - Model : TSA-1100HS (ESPEC)
  • - Temperature : -65 ℃ ~ 180 ℃
  • - Recovery Time : Within 5min
  • - Inside Size : 1,000 X 1,000 X 1,100m (W, D, H)
Medium/large room chamber (Two EA)
Medium/large room chamber (Two EA)
  • - Model : EBE-2EW6P2E4F_38M (ESPEC) EBE-8E30W6P2T4L_38M (ESPEC)
  • - Temperature : -60 ℃ ~ 100 ℃
  • - Humidity : 10 %R.H. ~ 98%R.H.
  • - Deviation : ±0.3 ℃, ±4.5%R.H.
  • - Cooling rate : Average 1.0 ℃/min
  • - Heating rate : Average 1.0 ℃/min
  • - Inside Size : 2,000 X 2,000 X 2,000 mm (W, D, H)
    4,000 X 4,000 X 3,500 mm (W, D, H)
Altitude tester (One EA)
Altitude tester (One EA)
  • - Model : MAT-1000 (Terdny)
  • - Temperature : -70 ℃ ~ 150 ℃
  • - Pressure : Normal ~ 0.5 kPa
  • - Feet : Normal ~ 130,000
  • - Deviation : ≤±2kPa (≥40kpa)
    ≤±5% (2 ~40kpa)
  • - Inside Size : 1,000 X 1,000 X 1,000 mm (W, D, H)
Dust tester (Two EA)
Dust tester (Two EA)
  • - Model : P14.46 (PLT)
  • - Vacuum : -20 mbar
  • - Talcum : 2 kg/㎥
  • - IP : 5X, 6X
  • - Inside Size : 700 X 300 X 700 mm (W, D, H)
  • - Inside Size : 2,000 X 2,000 X 2,500 mm (W, D, H)
Spray and rain tester (One EA)
Spray and rain tester (One EA)
  • - Model : Spray and rain tester (KTR)
  • - IP : X1, 2, 3, 4, 5, 6, 6K, 7, 9K
  • - Rotation angle : ±60˚, ±180˚ (X3, X4)
  • - Test time: At least three minutes ~ 10 minutes
  • - Quantity of flow for test : 12.5L/min (X5), 100L/min (X6)
Acceleration tester (One EA)
Acceleration tester (One EA)
  • - Model : Acceleration tester (GU)
  • - Maximum acceleration : 100 g
  • - Maximum load : 150 kg
  • - Slip ring : 24 ch, 2A/ch, AC, DC available
  • - Arm Size : 1,500 mm
  • - Table Size : 800 X 800 mm
Slope tester (One EA)
Slope tester (One EA)
  • - Model : Slope tester (Sejong F.A)
  • - Slope : Maximum section (25˚), maximum front (50˚)
  • - Maximum load: 1.5 ton
  • - Speed ？？control: Able to set time for one round trip
  • - Table Size : 1,200 X 1,200 mm
Drop tester (One EA)
Drop tester (One EA)
  • - Model: Drop Tester (Neuron Pit Co., Ltd.)
  • - Test height : 300 ~ 1 800 mm
  • - Maximum load : 60 kg
  • - Height control: Manual
  • - Control of the dropping method : Manual (edge, floor, etc.)
  • - Floor board size : 1 200 X 1 500 mm
Sand dust tester (1 EA)
Sand dust tester (1 EA)
  • - Model : Sand dust tester (AIR DYNAMICS (USA))
  • - Test temperature : 23 ℃ ~ 70 ℃
  • - AIR VELOCITY : Land (1.5 ± 1) to (8.9 ± 1.3) m/s
    Sand (18 ~ 29) m / s
  • - Switch : 360° rotatable
  • - External size : 3Ⅹ 6.8 Ⅹ 4.5 m (W, D, H)
  • - Internal size : 1,000Ⅹ 1,000 Ⅹ 1,00 mm (W, D, H)
Rainfall tester (One EA)
Rainfall tester (One EA)
  • - Model : Rainfall tester (KTR (Korea))
  • - MIL-STD-810 : Procedure 1, procedure 2, procedure 3
  • - DO-160 : Drip proof test
  • - Max EUT SIZE : 1.5 Ⅹ 1.5 Ⅹ 1.5 m (W,D,H)
  • - Wind speed : 18 m/s
  • - Test temperature : 23 ℃ ~ 70 ℃
  • - Bottom of the chamber : Sample rotation table
Pulse generator
Pulse generator
  • - Model : M-CS115 / POG-CS116-6
  • - Charging Voltage : 2 kV / 15 kV
  • - Pulse Width : 30 ns (CS115)
  • - Frequency : 10 kHz ~ 100 MHz (CS116)
  • - Size : 630 mm x 530 mm x 485 mm
  • - Weight : 34.5 kg
E-field generator
E-field generator
  • - Model : EFG-03
  • - Frequency : 10 kHz ~ 100 MHz
  • - Power Handling 3.5 kW
  • - Impedance : 50 ohms nominal
  • - Element Dimensions : 87 cm x 155 cm
  • - Height Adjustment : 122 cm
  • - Weight : 68 kg
  • - Input Connector : 7/16 female
  • - Cooling : Not Required
Broadband antenna with large output
Broadband antenna with large output
  • - Model : HPBA-2510
  • - Frequency : 25 MHz ~ 100 MHz
  • - VSWR : 2.5:1 average
  • - Polarization : Linear
  • - Power Handling : 3.5 kW
  • - Feedpoint Impedance : 50 ohms nominal
  • - Weight : 9.1 kg
  • - RF Connector : 7/16 female
Lightning induction tester
Lightning induction tester
  • - Indirect lightning tester
  • - Multiple Stroke Generator: indirect lightning test on aircraft: Multiple Stroke (MS). WF1 & WF4 (6.4/70μμs); WF5A (40/120μμs); WF5B (50/500μs) up to 24 pulses.
  • - Single Stroke Generator : Generator for indirect lightning test on aircraft Single stroke (SS). WF1 (6.4/70μs) 250A up to 4000A, WF4: (6.4/70μs) 125V up to 3200V and WF5A: (40/120μs) 400A up to 6000A.
  • - Multiple Burst Generator : Generator for indirect lightning tests : PIN injection W3, 1MHz, Level 3, cable bundle WF3: 1MHz, 10MHz up to Level3, WF2: 0.1/6.4μs up to level 5. Multiple burst WF3 1MHz and 10MHz up to Level 5.
  • - Oscillatory Multiple Burst Generator + EXT : 4 Unit High mainframe for one NW­lWFx­xxxFS (first stroke) and one NW WFx xxx SS module with connections to generator OS MB. Controlled by the generator
V-Log periodic antenna
V-Log periodic antenna
  • - Model : VAL-8001
  • - Frequency : 80 MHz ~ 1 GHz
  • - Gain : 8 dBi
  • - VSWR : 1.5:1 average
  • - Polarization : Linear
  • - 3 dB Beam Width : 65 degrees
  • - Power Handling : 1 kW
  • - Impedance : 50 ohms nominal
EMP pulse generator
EMP pulse generator
  • - Model : EMP80K-5/500
  • - Peak Open Circuit Voltage : 10 kV ~ 80 kV
  • - Source Impedance : > 60 ohm
  • - Peak Short Circuit Current : > 1 kA
  • - Pulse Shape : Double exponential waveform
  • - Rise Time : < 20 ns
  • - Pulse Width : 500 ns ~ 550 ns
  • - Weight : 80 kg
EMP pulse generator
EMP pulse generator
  • - Model : EMP300K-5/500
  • - Peak Open Circuit Voltage : 100 kV ~ 350 kV
  • - Source Impedance : > 60 ohm
  • - Peak Short Circuit Current : 1.5 kA ~ 6.0 kA
  • - Pulse Shape : Double exponential waveform
  • - Rise Time : < 20 ns
  • - Pulse Width : 500 ~ 550 ns
  • - Weight : 175 kg
Mold testing chamber (Four EA)
Mold testing chamber (Four EA)
  • - Inner dimension
    850 x 850 x 850 mm (W, D, H)
  • - Temperature range : (5 ~ 70) ℃ ± 1.0 ℃
  • - Humidity range : (30 ~ 98) % R.H. ± 2.0 % R.H.
  • - Air velocity : (0.5 ~ 1.0) meters/second
Fluid contamination (Forced convection oven, one EA)
Fluid contamination (Forced convection oven, one EA)
  • - Model: Forced convection oven
  • - Test temperature : 23 ℃ ~ 250 ℃
  • - External size : 577Ⅹ 642 Ⅹ 760 mm (W, D, H)
  • - Internal size : 400Ⅹ 360 Ⅹ 420 mm (W, D, H)
Salt spray chamber
Salt spray chamber
  • - Chamber Capability : 2000 L
  • - Chamber Internal Dimension : 2,160 mm X 980 mm X 1,320 mm
  • - Temperature range : -40 ℃ ~ 70 ℃
  • - Humidity range : (20 - 100) % R.H.
  • - Mode of Operation : Salt Spray, Dry, Humidity, Controlled Humidity & Temperature

Radiographic test(RT)

Radiographic test(RT)

Ultrasonic test(UT)

Ultrasonic test(UT)

Penetration test(PT)

Penetration test(PT)
Nondestructive test
  • - MIL-STD-2175, MIL-STD-1907, AMS-STD-2175, AMS-A-21180
  • - Test range: Radiographic test(RT), Ultrasonic test(UT), Magnetic particle test(MT), liquid penetration test(PT)
  • - X-ray generator: (140 ~ 300) kV. 5mA
Semi-anechoic room(One EA)
Semi-anechoic room(One EA)
  • - Size : 9.8 m × 6.2 m × 7.4 m (W × D × H)
  • - Ambient noise : 7.5 dB(A)
  • - Low cut-off frequency : 63 Hz
Frequency analyzer (acoustic, vibration analysis, 2 EA)
  • - Model : 3050-A-060
  • - 6 Input channels
  • - 6.3 Hz to 20 kHz input range
  • - Sound Power Level(PWL), Sound Pressure Level(SPL)
  • - FFT, CPB octave analysis